Sale Price:
£5,500.00
Original Price:
£6,500.00
Pre-order now: 32mm CAS Rigging Kit
A complete 32mm rigging system in one kit. Build frames, risers, arms and mounting points on set without hunting for parts across the truck.
The kit is built around our CAS split clamps, and every part is designed by Cat O'Nine to work with the rest of the system. You can rig fast and break down cleanly. Threaded tubes in six lengths, from 150mm to 1.5m, connect with tube joiners, T90 clamps and T90 Clamp Cornerstones to make straight runs, right angles and corners. Starters and adapter joiners give you M8, M10 and 3/8" mounting points wherever you need them. The parallel bars give you a wide, solid platform for mounting cameras.
Four 32mm levelling feet give the build a stable, adjustable base. Each one is a 3" starter with an M10 bolt and a 60mm anti-slip rubber foot on an articulated stem. It fits straight into your rig and sits flat, even on uneven floors.
The accessories travel in a wheeled Nanuk 940 hard case with a custom foam insert. Every part has its own pocket, so you can see at a glance that nothing is missing at wrap. The tubes wheel out in a Nanuk 995 case. Every part has its own cut-out, ensured it is protected in travel and
What's in the box: 92 pieces
In the case
20 × 32mm CAS Split Clamps
10 × 32mm Starters, 100mm (4")
14 × 32mm Tube Joiners
4 × 32mm Joiners, M8/M10 Starter End
4 × 32mm Joiners, 3/8" Female End
4 × T90 Clamps
4 × T90 Clamp Cornerstones
2 × 32mm Parallel Bars
4 × 32mm Levelling Feet
In the Nanuk 995 Wheeled Case:
The parts
32mm CAS Split Clamp: the core of the system. A hinged split clamp that closes securely around 32mm tube and can be repositioned anywhere along a run without taking the rig apart.
32mm Starter, 100mm (4"): a solid cylinder of Ali with 3/8×16 UNC Threads.
32mm Tube Joiner: joins two threaded tubes end to end into one straight, solid run. Mix tube lengths to get the span you need.
32mm Joiner, M8/ or 3/8×16 Starter End: ends a tube in an M8/ 3/8×16 UNC thread, for mounting plates, brackets and additional accessories directly onto the rig. (four of each included in the kit.
T90 Clamp: locks one tube to another at a solid 90 degrees, for cross-members, braces and offsets.
T90 Clamp Cornerstone: a joiner and a 90-degree clamp in one fitting. It makes clean, rigid corners for frames and box builds.
32mm Parallel Bar: a wide bar that spans two parallel tubes. It gives you a stable platform for mounting cameras or heavier payloads.
32mm Levelling Foot: a 3" starter with an M10 bolt and a 80mm anti-slip rubber foot on an articulated stem. Screw it in or out to level the rig. The rubber grips the floor and the stem tilts to sit flat on uneven ground. ant slip, vibration isolating feet ensure a solid foundation to build up from.
Threaded Tubes, 150mm to 1200mm: hard-anodised 32mm tube in six lengths, threaded to join with the tube joiners. Use them alone or combined to build any span from 150mm upwards.
Pre-order now: 32mm CAS Rigging Kit
A complete 32mm rigging system in one kit. Build frames, risers, arms and mounting points on set without hunting for parts across the truck.
The kit is built around our CAS split clamps, and every part is designed by Cat O'Nine to work with the rest of the system. You can rig fast and break down cleanly. Threaded tubes in six lengths, from 150mm to 1.5m, connect with tube joiners, T90 clamps and T90 Clamp Cornerstones to make straight runs, right angles and corners. Starters and adapter joiners give you M8, M10 and 3/8" mounting points wherever you need them. The parallel bars give you a wide, solid platform for mounting cameras.
Four 32mm levelling feet give the build a stable, adjustable base. Each one is a 3" starter with an M10 bolt and a 60mm anti-slip rubber foot on an articulated stem. It fits straight into your rig and sits flat, even on uneven floors.
The accessories travel in a wheeled Nanuk 940 hard case with a custom foam insert. Every part has its own pocket, so you can see at a glance that nothing is missing at wrap. The tubes wheel out in a Nanuk 995 case. Every part has its own cut-out, ensured it is protected in travel and
What's in the box: 92 pieces
In the case
20 × 32mm CAS Split Clamps
10 × 32mm Starters, 100mm (4")
14 × 32mm Tube Joiners
4 × 32mm Joiners, M8/M10 Starter End
4 × 32mm Joiners, 3/8" Female End
4 × T90 Clamps
4 × T90 Clamp Cornerstones
2 × 32mm Parallel Bars
4 × 32mm Levelling Feet
In the Nanuk 995 Wheeled Case:
The parts
32mm CAS Split Clamp: the core of the system. A hinged split clamp that closes securely around 32mm tube and can be repositioned anywhere along a run without taking the rig apart.
32mm Starter, 100mm (4"): a solid cylinder of Ali with 3/8×16 UNC Threads.
32mm Tube Joiner: joins two threaded tubes end to end into one straight, solid run. Mix tube lengths to get the span you need.
32mm Joiner, M8/ or 3/8×16 Starter End: ends a tube in an M8/ 3/8×16 UNC thread, for mounting plates, brackets and additional accessories directly onto the rig. (four of each included in the kit.
T90 Clamp: locks one tube to another at a solid 90 degrees, for cross-members, braces and offsets.
T90 Clamp Cornerstone: a joiner and a 90-degree clamp in one fitting. It makes clean, rigid corners for frames and box builds.
32mm Parallel Bar: a wide bar that spans two parallel tubes. It gives you a stable platform for mounting cameras or heavier payloads.
32mm Levelling Foot: a 3" starter with an M10 bolt and a 80mm anti-slip rubber foot on an articulated stem. Screw it in or out to level the rig. The rubber grips the floor and the stem tilts to sit flat on uneven ground. ant slip, vibration isolating feet ensure a solid foundation to build up from.
Threaded Tubes, 150mm to 1200mm: hard-anodised 32mm tube in six lengths, threaded to join with the tube joiners. Use them alone or combined to build any span from 150mm upwards.
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
